Skip to main content

Using Multimedia Layouts

Utilize multiple photos and/or videos in one workspace to highlight more content than ever before! Layouts are great for pairing different video angles or still images for seamless story

What’s in this article:

What is a Layout?

Layouts are the ability to stack or combine up to seven images and/or videos into one piece of content in Slate utilizing predetermined grids/layout options.

Layouts are available on mobile and in the web creation studio. The two work a little differently for now: on mobile you select your media first and then choose a layout, while on web you add a layout to your timeline first and then fill its slots.

How to Use Layouts on Mobile

1. Open or create a project and tap 'Media' in the bottom toolbar.

2. Tap two or more photos and/or videos in the media drawer. Layout options appear at the bottom of the drawer, based on the number of media you select.

3. Make sure the layout (grid) icon is selected, tap the layout you want to use, and tap 'Add'.

​

4. To make edits, tap 'Edit' in the bottom toolbar. Each section of the layout shows its own 'Edit' button, and you can drag the green bar between sections to resize them.

5. Tap 'Edit' on a section to adjust that piece of media. Its tools include Adjust, LUTs, Replace, Delete, Crop, and Fit.

​

6. With the whole layout selected, you can also Replace, Delete, or Lock it.

TIP: To change your layout or media, open 'Media' again and select or deselect media.

Overlays for Layouts

Overlays can be applied to layouts, and built custom for these spaces. Here's how to use overlays with layouts:

1. Build your layout following the steps above.

2. Tap 'Overlays' in the bottom toolbar and choose the overlay that matches your layout design.

3. Tap 'Edit' and drag the green bar between your media so it lines up with the overlay.

4. If needed, tap 'Edit' on a section and use Crop or Fit to position your media in the space.

NOTE: As you are designing overlays, make sure they support one of our layout options for media.

Video Walkthrough

How to Use Layouts on Web

  1. Open Layouts in the left side menu

  2. Choose a layout from the drawer

  3. Once you select your layout, the media drawer will open and you can either simply click on the media you want to drop in, or select the area first, and then select the media from the media drawer

  4. Need to reposition the media?

    1. Click the layout once to select it

    2. Double-click a slot to select the media inside it

    3. Drag to move the media within its slot, or drag a corner handle to zoom in

Changing the Layout

Select a layout and click Change layout, either in the panel or on the layout name in the floating toolbar. The same tracks are reused in order, and any slot without a track stays empty until you add new media.

NOTE: Changing to a different layout resets any custom framing you set inside slots, so media fills the new slot shapes cleanly.

Styling a Layout on Web

Frame and Border

The Frame section controls how slots sit on the canvas:

Setting

What It Does

Corner radius

Rounds the slot corners

Gap

Space between slots

Inset

Space between the slots and the canvas edge

Fill inset

Color for the space around and between slots. Appears once inset is above 0, and defaults to white

Border adds an outline around the slots, with its own Border width and color. Reset returns everything to the layout defaults, and Delete removes the layout.

Angled Layouts and Seam Angles

The Angled layouts have diagonal seams between slots. You can also angle any split layout from Transform > Seam angle.

Same angle for all keeps every seam at the same angle. Turn it off to control each seam separately — Seam 1, Seam 2 — and angle them in different directions.

NOTE: Angled strips are narrow, so reframe each one after switching. Double-click the strip and drag the media until your subject sits inside it.

Available on:

iOSLogoAndroidLogoWebIcon

FAQs:

Q: Can I overlap media in layouts on top of each other?

A: No, layouts export flush with each other. If you want to overlap and layer media, try utilizing our media as a sticker iOS feature or drop in media outside of a layout on web.

Q: Can I add more than seven pieces of media?

A: No, layouts currently only support seven pieces of media. If you’d like to use more, try our media as a sticker feature.

Q: Can I add a GIF into a layout?

A: No, layouts currently only support video and image file types.

Q: Can I change the media or layout version I’ve selected?

A: Yes! Go back to 'Media' to change your layout style. You can also add/remove media from your layouts in this drawer by tapping or untapping on media to select/deselect it.

Q: Can I use more than one layout in a video on web?

A: Yes. Each layout is a separate item on the LAYOUTS lane with its own type and settings. A new layout runs from the playhead to the next layout or the end of the project.

Q: What happens when I split a clip that’s in a slot?

A: Both parts stay in the same slot and keep the framing you set.

Q: Why is some of my media showing over the layout instead of inside it?

A: That track isn’t assigned to any slot, so it displays as normal media. Assign it to a slot in Slot media, or remove it.

Q: Can I use layouts in a carousel project?

A: No, layouts aren’t supported in carousel projects.

Did this answer your question?